大靠谱真实外围APP喝茶凤楼软件平台，苹果喝茶凤楼软件，百度同城行业
time:2021-10-11
同城约茶服务平台联系:【点击进入平台立即约茶】 同城私人约茶、约茶到家服务联系:【点击查看同城约服务】一键预约轻松体验服务，可去距离自己最近的线下体验店茶会时间： 24：00小时完成签到.
【点击进入约茶服务平台-入口】
“同城约服务联系-进入查看线下约会到家交友约服务的平台网站，缘分从约会开始”即真正的约服务交友到家去距离自己的线下会所体验店约服务【点击查看进入平台立即约茶】059。
It plays the dual role of fuse and resistance in the circuit diagram. It is mainly used in the output circuit of power supply circuit and the output circuit of secondary power supply. They generally have low resistance (several ohms to tens of ohms) and low power (1 / 8 ~ 1W). Their function is to fuse in time in case of overcurrent to protect other components in the circuit from damage.
In case of short-circuit fault and overcurrent of circuit load, the temperature of safety resistor will rise to 500 ~ 600 ℃ in a very short time. At this time, the resistance layer will be peeled off and fused, which plays the role of safety and improves the safety of the whole machine.
Discrimination method
Although fuse resistors are widely used in power supply circuits, the marking methods in circuit diagrams of countries and manufacturers are different. Although the marking symbols are not unified at present, they have common characteristics:
(1) They are obviously different from the marking of general resistance, which is easy to judge in the circuit diagram.
(2) It is generally used in low-voltage or high-voltage circuits with large current capacity of power circuit or secondary power supply.
(3) There is only one color ring on the fuse resistor. As shown in the attached figure, the color of the color ring represents the resistance value.
(4) In the circuit, the safety resistor is a long leg welded on the circuit board (generally, the resistor is welded close to the circuit board), which is far away from the circuit board, which is convenient for heat dissipation and differentiation.
Specification standard
(1) RN1 / 4W, 10 Ω safety resistor, color ring is black, power is 1 / 4W; When 8.5V DC voltage is applied to both ends of the safety resistor, the resistance increases to more than 50 times of the initial value within 60 seconds.
(2) RN1 / 4W, 2.2 Ω safety resistor, red color ring, power 1 / 4W; When 3.5A current passes through, the resistance increases to more than 50 times the initial value within 2 seconds.
(3) RN1 / 4W, 1 Ω safety resistor, color ring is white, power is 1 / 4W; When 2.8A AC current passes through, the resistance increases to more than 400 times the initial value within 10 seconds.
How to distinguish between ordinary resistance and safety resistance
Both have the function of resistance, but the resistance fuse is equal to the resistance plus fuse. When the added power exceeds the power of the resistance, the fuse will burn out and the whole resistance will not smoke. The resistance will burn and smoke when the added power exceeds its own power.
The noise electromotive force of resistor is composed of thermal noise and current noise. The noise of wire wound resistor is limited to thermal noise, while the thin-film resistor has current noise in addition to thermal noise. This is because under the action of applied voltage, irregular vibration is generated between conductor particles, which makes the resistance value fluctuate, thus modulating the current flowing through the resistor.
Generally, the noise and noise electromotive force of metal film resistor, carbon film resistor and wire wound resistor are small, while the noise and noise electromotive force of synthetic film resistor and solid core resistor are much higher. For the high amplification stage and high gain preamplifier stage of the receiving circuit, it is better to select metal film resistor and carbon film resistor.
